Projects

FAA – LAN Re-Wire MSP ATCT and TRACON, Minneapolis, MN
Contract Number: DTFAGL-10-C-00253
Description: The scope of work for this project included LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

VA – Ann Arbor Healthcare System Oncology Phase I Ann Arbor, MI
Contract Number: VA251-C-0753
Description: The project scope included interior demolition, interior renovation including drywall, sprinkler, plumbing, mechanical, electrical, security, intercom, data, casework, finishes including tile paint VCT and sheet flooring, and medical gas.

VA – Ann Arbor Healthcare System Pharmacy Phase II Ann Arbor, MI
Contract Number: VA251-C-0844
Description: The project scope included interior demolition, interior renovation including drywall, sprinkler, plumbing, mechanical, electrical, security, intercom, data, casework, finishes including tile paint VCT and sheet flooring.

VA – Saginaw Electrical Closets Saginaw, MI
Contract Number: W911XK-10-C-0004
Description: The project scope included electrical construction and replacement of existing electrical distribution systems as well as other general construction responsibilities.

FAA – NEXCOM, Lunken, Cincinnati, OH
Contract Number: DTFACN-11-C-00047
Description: Rewire of ATCT/RTR. Provide and install lightning protection, direct burial Heliax cable, NEMA junction boxes and associated underground pipe and civil work for five 120’ towers.

FAA – LAN Re-Wire Orlando TRACON/ Jacksonville ARTCC, FL
Contract Number: DTFAEA-10-C-00271
Description: The scope of work for this project included LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

WAPA – Liberty Electrical Substation Fencing Project, Buckeye, AZ
Contract Number: DE-AF65-10WG45909
Description: Project scope was to provide perimeter security via razor wire and site surveillance with a custom installed MobilePro Systems surveillance package.

FAA – Modernization of the Minot ATCT, Minot ND
Contract Number: DTFAGL-10-C-00025
Description: The project was a renovation including Insulated Panel Siding, Electrical, HVAC, Finishes, and Plumbing for the Air Traffic Control Tower and Administrative Base Building at Minot International Airport, Minot, ND.

FAA – LAN Re-Wire ZID ARTCC Indianapolis Phase II Indianapolis, IN
Contract Number: DTFAGL-10-C-00241
Description: The scope of work for this project included LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

FAA – HVAC Replacement Gettysburg, SD
Contract Number: DTFAGL-10-C-00124
Description: The project scope included replacement of critical HVAC equipment and controls systems integration in an operational long range radar site.

FAA – LAN Re-Wire Denver Tracon, Denver, CO
Contract Number: DTFANM-10-P-00577
Description: The scope of work for this project included LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

FAA – LAN Re-Wire Greer ATCT
Contract Number: DTFAEA-10-C-00244
Description: The scope of work for this project included LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

FAA – LAN Re-Wire Charleston ATCT
Contract Number: DTFAEA-10-C-00246
Description: LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

FAA – LAN Re-Wire Florence ATCT
Contract Number: DTFAEA-10-C-00247
Description: LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

FAA – HVAC Replacement ISF Building, Aurora, IL
Contract Number: DTFAGL-10-C-00200
Description: The project scope included replacement of HVAC systems at the Aurora ISF.

FAA – LAN Re-Wire Tulepo and Columbus MS
Contract Number: DTFANE-10-C-00066
Description: LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

FAA – LAN Re-Wire Raleigh ATCT Raleigh, NC
Contract Number: DTFANE-10-C-00054
Description: LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

FAA – Refurbish RCAG Facility, Effingham, IL
Contract Number: DTFAGL-09-C-00258
Description: The project was a renovation including siding, painting, and VCT tile installation.

FAA – Modernization of the MBS ATCT, Freeland, MI
Contract Number: DTFAGL-09-C-00056
Description: The project was a renovation including Electrical, HVAC, Finishes, Plumbing, Masonry and paving for the Air Traffic Control Tower and Administrative Base Building at MBS International Airport, Freeland, MI.

FAA – Ductbank and Cabling, Hughes Tech Center, Atlantic City, NJ
Contract Number: DTFACT-09-C-00025
Description: The project includes duct bank and manhole installation including copper and fiber optic cabling and termination.

FAA – Update Break Rooms and Rest Rooms, Minneapolis, MN
Contract Number: DTFAGL-09-C-00342
Description: The project was a renovation of break rooms and rest rooms at the Minneapolis ATCT, consisting of countertop and appliance installation.

FAA – Automated Data Processing III, Baltimore, MD, and Andrews AFB, Wash DC.
Contract Number: DTFAEA-09-C-00265
Description: The project was structured cabling installation including copper and fiber optic cabling, racking and runway systems.

FAA – Replace Doors at AMP ARTCC, Farmington, MN
Contract Number: DTFAGL-09-C-00319
Description: The project was to replace 15 doors and door hardware in various locations in the Farmington ARTCC.

FAA – Milwaukee ATCT HVAC, Milwaukee, WI
Contract Number: DTFAGL-09-C-00290
Description: Replace Air Handling Units for 3 zones in the ATCT at General Mitchell International Airport, Milwaukee, WI.

FAA – Appleton ATCT Interior Renovation, Appleton, WI
Contract Number: DTFAGL-09-C-00304
Description: The project was for interior stairwell and office painting, and flooring and ceiling replacement.

FAA – Seattle ARTCC LAN Rewire, Auburn, WA
Contract Number: DTFANM-09-P-00506
Description: The project was a demo and re-wire of LAN network structured cabling

FAA – Fargo Cab Siding, Fargo, ND
Contract Number: DTFAGL-09-C-00172
Description: The project was installation of insulated panel siding system on the cab of the ATCT in Fargo, ND.

FAA – Mansfield ATCT Modernization Project, Mansfield, OH
Contract Number: DTFAGL-09-C-00027
Description: The project was a renovation including Electrical, HVAC, Finishes, Plumbing, Masonry and Tile for the Air Traffic Control Tower and Administrative Base Building at Lahm Municipal Airport, Mansfield, OH.

FAA – Rewire ATCT Madison, WI, Milwaukee, WI, Chicago, IL
Contract Number: DTFAGL-09-C-00082
Description: The project was a renovation including demo and rewiring of the LAN network structured cabling at FAA facilities in Madison, WI, Milwaukee, WI, and Chicago, IL.

FAA – Southern California TRACON Cabling, San Diego, CA
Contract Number: DTFANM-09-C-00088
Description: The project was a renovation including demo and rewiring of the LAN network structured cabling at the Southern California TRACON, in San Diego, CA.

FAA – Automated Data Processing II, Southeastern USA
Contract Number: DTFAEA-08-C-00118
Description: Provide labor and materials upgrade, replace, or newly install copper and fiber optic structured cabling network throughout 5 facilities.

FAA – Tyler ARSR HVAC Replacement of A/C Units
Contract Number: DTFAGL-09-C-00069
Description: The project was a replacement of two primary A/C units at the Air Route Surveillance Radar Facility located in Tyler, MN.

FAA – Re-cable RTR at Dulles Intl Airport, MI
Contract Number: DTFAEA-08-C-00140
Description: Provide install and terminate junction boxes and heliax cable for Remote Transmitter/Receiver towers.

FAA – Appleton ATCT Modernization Project, Appleton, WI
Contract Number: DTFAGL-08-C-00153
Description: The project was a renovation including Electrical, HVAC, and Insulated Panel Siding for the Air Traffic Control Tower at the Outagamie County Airport in Appleton, WI.

FAA – Hughes Technical Telecom Projects, Atlantic City, NJ
Contract Number: DTFAEA-08-C-00039
Description: Provide labor, materials and equipment necessary to install conduit, manholes, innerduct, copper and fiber cabling.

FAA – Automated Data Processing, Southeastern USA
Contract Number: DTFAEA-08-C-00079
Description: Provide labor and materials upgrade, replace, or newly install copper and fiber optic structured cabling network throughout 4 facilities and 16 projects.

FAA – Green Bay LAN Rewire, Green Bay, WI
Contract Number: DTFAGL-08-C-00289
Description: Renovation of the Dental Facility at the Ann Arbor Michigan VAMC. Dental Facility Scope of Work to include electrical, mechanical, wall care and millwork.

FAA – NEXCOM, Rochester, MN, and Mankato, MN
Contract Number: DTFAGL-08-C-00177, DTFAGL-08-C-00176
Description: Rewire of VORTAC/RCAG. Provide and install direct burial Heliax cable, NEMA junction boxes and associated underground pipe and civil work.

VA – VAMC Dental Facility Renovation, Ann Arbor, MI
Contract Number: VA251C-0162
Description: Renovation of the Dental Facility at the Ann Arbor Michigan VAMC. Dental Facility Scope of Work to include electrical, mechanical, wall care and millwork.

FAA – Wiring Project at the ZJX ARTCC, Jacksonville, FL
Contract Number: DTFASO-07-P-00998
Description: LAN Infrastructure including copper, fiber racking, enclosures, termination and testing. Future phases expected in FY ’08.

FAA –Ft Wayne FOTS, Fort Wayne, IN
Contract Number: DTFAGL-08-C-00264
Description: Remove, re-route and re-install Air Blown Fiber, Tube Cable and associated TDU’s where fiber was damaged by another contractor.

BIA – Ft. Washakie, WY, Ft. Yates, ND
Contract Number: CMS00080004, RMS00080007
Description: Provide labor, equipment and materials to install Cat 6 structured cabling network.

FAA – LAN Re-Wire and Infrastructure Upgrade, Oberlin ARTCC, Oberlin, OH
Contract Number: DTFAGL-07-C-00326
Description: LAN Infrastructure including copper, fiber racking, enclosures, termination and testing. Future phases expected in FY ’08.

FAA – Memphis ZME ARTCC, Memphis, TN
Contract Number: DTFASO-07-P-01198
Description: LAN Infrastructure including copper, fiber racking, enclosures, termination and testing. Future phases expected in FY ’08.

FAA – Modernization of the Air Traffic Control Tower, Williamson Cty Airport, Marion, IL
Contract Number: DTFAGL-07-C-00035
Description: The overall project includes electrical, mechanical, grounding, lightening protection, and roofing and exterior upgrade. Our responsibility on this project was electrical, lightening protection, and grounding.

FAA – FAA – Modernization of the ATCT, Aurora Municipal Airport, Sugar Grove, IL
Contract Number: DTFAGL-07-C-00117
Description: This project was the Modernization of the Air Traffic Control Tower at the Aurora Municipal Airport. It consisted of remodeling of multiple disciplines including electrical, HVAC, membrane roofing, grounding, drywall, painting and landscape.

FAA – Detroit Metropolitan Airport, Detroit, MI
Contract Number: DTFAGL-06-C-00118
Description: Phase 3 FOTS is a continuation of Phase 2 FOTS in which a fiber optic SONET ring was installed to connect the Air Traffic Control Tower to additional on airport facilities with an all dielectric redundant network.

FAA – Rhinelander NEXCOM URR RCAG, Rhinelander, WI
Contract Number: DTFAGL-07-C-00149
Description: This NEXCOM Antenna project involved installation of underground conduit and outside plant enclosures, and routing of RF and aerial cables, installation and termination of lightening protection for airport communications.

FAA – O’Hare LAN Re-Wire, O’Hare International Airport, Chicago, IL
Contract Number: DTFAGL-06-C-00143
Description: Description: LAN Infrastructure including copper, fiber racking, enclosures, termination and testing.

FAA – Detroit International Airport
Contract Number: DTFAGL-05-C-00085
Description: Phase 2 FOTS included engineering and planning of the fiber optic infrastructure for the airport grounds, including the trenching and boring of outside plant, with innerduct and installation and termination of both air blown and traditional style fiber optic cable. The fiber optic ring connected the Air Traffic Control Tower to various other buildings housing critical equipment around the airport campus. Included was racking equipment along with Alcatel MUX, fiber optic ring and Channel Bank equipment. All equipment is installed, terminated, tested and guaranteed.

FAA – Ft. Wayne International Airport
Contract Number: DTFAGL-05-R-00042
Description: The scope of work for this contract was to completely re-route the existing copper cable from the old Air Traffic Control Tower to the RTR facility so it could be transitioned to fiber at the new ATCT to provide two independent fiber pathways for primary and diverse or redundant operation. Best was responsible for the installation of all fiber and copper material in existing and new conduit duct banks we provided. We were also responsible for the installation of all Alcatel and Fujitsu multiplexer and OC-3 electronics equipment. Finally, we were required to test all installations to ensure operation in accordance with FAA standards, turning over a completely operational system to the Fort Wayne Airport Authority.

FAA – O’Hare International Airport
Contract Number: DTFAGL-05-C-00094
Description: Best provided engineering services for a duct bank installation at O’Hare International Airport. The engineering involved site review and submittal of CAD drawings including location and specifications for the proposed duct bank.

FAA – O’Hare International Airport
Contract Number: DTFAGL-05-F-00043
Description: Best provided Alcatel Channel Bank products and related cabling items to the airport for owner installation.

Marine Corps Base Camp Lejeune, North Carolina
Contract Number: M67001-05-P-0038
Description: Provided telecommunications supplies including high pair count copper cable and termination supplies.